Two examples from our program: Model HS 140 / 48 and Model HS 140/144
Horizontal braider with caterpillar pull-off HS 140 / 48
For overbraiding rigid components with carbon-fibre yarns and other materials used for the composites industry.
This machine can also be used for overbraiding bulky components by removing the covers.
By using a different carrier set-up to the one shown in the picture, it is possible to work with wire as well.
The machine is fitted with an integrated dust-extraction system to remove
any dust which may be generated.
| Length: | 2000 mm |
| Width: | 2300 mm |
| Height: | app. 2000 mm |
| Weight: | app. 1500 kg |
| Power supply: | 400 V / 50 Hz |
| Drive power: | 2,2 kW |
| Horn gear diam.: | ø 140 mm |
| Horn gear revolutions: | up to 180 rpm (depending on used material) |
| Drive power: | 48 |
| Bobbin dimension: | ø 70 x 250 mm (app. 860 ccm) |
Horizontal braider HS 140 / 144
For manufacturing braids for the aircraft, space and car industries.
The size of the machine enables it to be used for braids of large size
or diameter. The machine can also be easily used to overbraid cores such as those used for fibre-reinforced components.
Because the upper section is removable, this type of machine can easily be transported in a sea container.
The machine has been successfully marketed throughout the world with various different accessories and fittings, since 1992.
| Length: | app. 2000 mm |
| Width: | app. 3600 mm |
| Height: | app. 3700 mm |
| Weight: | app. 1500 kg |
| Power supply: | 400 V / 50 Hz |
| Drive power: | 6 kW |
| Horn gear diam.: | ø 140 mm |
| Horn gear revolutions: | up to 180 rpm (depending on used material) |
| Number of carriers: | 144 |
| Bobbin dimension: | ø 70 x 250 mm (app. 860 ccm) |