Three examples from our program: Model D 140/24, K 80 / 16-1K and Model HS 80 / 144
Wire braider D 140 / 24
This machine has been specifically designed for braiding wire.
The braids are used for high-pressure hoses; insulation hoses and applications of this nature.
| Length: | 1300 mm |
| Width: | 1100 mm |
| Height: | app. 2000 mm |
| Weight: | app. 650 kg |
| Power supply: | 400 V / 50 Hz |
| Drive power: | 1,2 kW |
| Horn gear diam.: | ø 140 mm |
| Horn gear revolutions: | up to 180 rpm (depending on used material) |
| Number of carriers: | 24 |
| Bobbin dimension: | ø 60 x 110 mm (app. 250 ccm) |
Fine wire braider K 80 / 16 – 1K
For manufacturing fine-wire braids for medical technology, electrical technology and related areas.
This machine is suitable for processing fine wires and textile fibres, depending on the carrier.
The machine shown in the picture is fitted with carriers for braiding fine wires and can be used for processing wires with gauges up to AWG 53 ( ø 0.0176 mm ). This is for particular interest in the braiding of medical products such as catheters.
The machines shown in the picture are fitted with the following special accessories: single-wire monitor for multi-spooled wire; electronic metre counter and electronic monitor for core-thread feed.
| Length: | 850 mm |
| Width: | 500 mm |
| Height: | app. 2000 mm |
| Weight: | app. 185 kg |
| Power supply: | 400 V / 50 Hz |
| Drive power: | 0,29 kW |
| Horn gear diam.: | ø 80 mm |
| Horn gear revolutions: | up to 320 rpm (depending on used material) |
| Number of carriers: | 16 |
| Bobbin dimension: | ø 40 x 26 mm (max. 27,5 ccm) |
| Capstan wheel: | ø 318 mm |
Fine wire braider HS 80 / 144
For manufacturing fine-wire braids for medical technology, electrical technology and related areas.
This machine is suitable for processing fine wires or textile fibres, depending on the carrier.
The machine shown in the picture is fitted with carriers for braiding fine wires and can be used for processing wires made from all the usual materials.
The set-up shown here has predominantly been built from rust-resistant materials in order to meet the high standards demanded for medical technology applications.
The upper section of the machine can be removed for transport and can be fastened to the lower section for this purpose.
| Length: | 1400 mm |
| Width: | 2300 mm |
| Height: | app. 2300 mm |
| Weight: | app. 1400 kg |
| Power supply: | 220 V / 60 Hz (export version) |
| Drive power: | 2,3 kW |
| Horn gear diam.: | ø 80 mm |
| Horn gear revolutions: | up to 300 rpm (depending on used material) |
| Number of carriers: | 144 |
| Bobbin dimension: | ø 40 x 26 mm (app. 27,5 ccm) |