Two examples from our program: Model Hs 120 / 216 and Model K 80 / 64 HS
Horizontal braider HS 120 / 216
For manufacturing braids from composite materials for the aircraft, space and car industries.
The dimensions of the machine enable it to be used for overbraiding cores up to 8 m long. The maximum diameter is determined by the braiding ring fitted. The example in the photo is approximately 350 mm. Larger braiding rings can also be easily fitted.
The machine shown in the picture has been specifically designed for braiding carbon fibres. The machine can be used for forward or reverse braiding.
| Length: | app. 12000 mm |
| Width: | app. 6000 mm |
| Height: | app. 5000 mm |
| Power supply: | 400 V / 50 Hz |
| Drive power: | 12 kW (whole unit) |
| Horn gear diam.: | ø 120 mm |
| Number of carriers: | 216 |
| Bobbin dimension: | ø 80 x 200 mm (app. 899 ccm) |
Fine wire braider K 80 / 64 HS
For manufacturing fine-wire braids for medical technology, electrical technology and related areas.
This machine is suitable for processing fine wires and textile fibres, depending on the carrier.
The machine shown in the picture is fitted with carriers for braiding fine wires. The machine can be rotated to overbraid rigid components horizontally.
| Length: | 850 mm |
| Width: | 500 mm |
| Height: | app. 2000 mm |
| Weight: | app. 280 kg |
| Power supply: | 400 V / 50 Hz |
| Drive power: | 0,29 kW w(hole unit) |
| Horn gear diam.: | ø 80 mm |
| Horn gear revolutions: | up to 320 rpm (depending on used material) |
| Number of carriers: | 16 |
| Bobbin dimension: | ø 40 x 26 mm (app. 27,5 ccm) |
| Capstan wheel: | ø 318 mm |